ASTM E18 Rockwell Hardness Testing
SGS MSi provides a full service hardness test lab. Our testing schedule supports two shifts of personnel to ensure your material is processed on time.
ASTM E18 Rockwell hardness testing employs both standard Rockwell and superficial test scales to accommodate all shapes and thicknesses of material for testing.
Once hardness values have been identified our engineers can convert the hardness values to other hardness scales in accordance with ASTM E140 and ASTM A370. These hardness values are approximate as identified within the specifications and are commonly used when Rockwell hardness tests are required to be converted to ASTM E10 Brinell hardness test values.
SGS MSi is accredited for the following Rockwell hardness scales:
Rockwell ACemented carbides, thin steel and shallow case hardened steel
Rockwell BCopper alloys, soft steels, aluminum alloys, malleable irons, etc.
Rockwell CSteel, hard cast irons, case hardened steel and other materials harder than 100 HRB
Rockwell N - Diamond indenterThin materials, lightly carburized steel surfaces, or parts that might bend or crush
Rockwell T - 1/16” diameter steel ball indenterThin materials, lightly carburized steel surfaces
SGS MSi’s engineers review all material and required specifications to ensure your hardness testing is being performed to the correct parameters. The sample preparation is the most critical part of the hardness test. If the test surfaces are not parallel, of sufficient thickness, or not wide enough to permit testing away from an edge, an erroneous test value will result.
Our engineers review all test results before release to our clients. Verifying the performed tests were performed correctly, display the proper relationship to other requested tests and did they meet the requested specification requirements.
Remember all of the hardness testers will always give you a test value, but it is our experience that allows us to review the results to be sure the test was performed correctly.
Rockwell Hardness Test Methods & Specifications
The following is a listing of specifications that are in accordance with our A2LA and ISO accreditation.
- Rockwell: A, B, C, N, T
- ASTM E18
- ASTM F606
- ASTM F606M
- SAE J429