708.343.3444

ICP - Inductive Coupled Plasma (Wet Chemistry) Analysis

Metal ICP Chemical Analysis

SGS MSi is a leader in performing metal ICP chemical analysis. ICP is an acronym for inductively coupled plasma, which is the name of the test machine that can excite any liquid and identify the characteristic elemental wavelengths of the solution. We only perform metal chemical analysis of the following materials and alloys:

Inductive Coupled Plasma Testing

  • Steel
  • Stainless Steel
  • Aluminum
  • Titanium
  • Grey/Cast Iron
  • Copper/Brass/Bronzes
  • Tool Steel
  • Magnesium
  • Lead in Metal, Plastic & Fabric in accordance with CPSIA Requirements

Wet Chemistry Analysis

ICP is also known as “wet” chemical analysis, due to the nature of the metal solution that is being analyzed. Chips of the metal are dissolved or “digested” into an acid to create a metal solution. The solution is then “excited” by a plasma flame that analyzes the characteristic wavelengths and determines the concentrations of the elements in the solution. ICP metal analysis can be time consuming (and expensive…) depending on the following variables:

  1. Size of Sample (< 1 gram)
  2. Dirt or Contaminant on Sample Requiring Cleaning
  3. High Hardness Material
  4. Base Materials Other Than Steel or Stainless Steel
  5. Additional or Low Level Elements
  6. “Unusual” Elements Requiring Purchase of Standards and Development Time

Once the material has been digested and standards have been titrated to the proper concentrations; the actual ICP analysis can be performed. The metal solution is analyzed after the equipment has undergone the proper standardization. The Leeman Labs ICP equipment has reproducibility to 10 ppm (.0010 %) depending on the element and the concentration. Low-level detection limits of 5 ppm (.0005 %) are common for this equipment.

ICP Chemical Analysis

Our laboratory is nationally recognized for meeting RUSH test deadlines on time – every time. Department managers must approve all rush test requests. The RUSH specimens are received by the laboratory staff engineer who will:

  1. Supervises all testing through the lab departments
  2. Review the test results
  3. Sign off on the final test report
  4. Follow up call to confirm that the e-mail has been received

SGS MSi is a leader in RUSH ICP metal chemical analysis. Call today to have your testing needs discussed with one of our sales professionals today.

Click here to request a quote

Chicago Lab: 708.343.3444   

Calgary Lab - 403.262.7072   |   Edmonton Lab - 780.468.3030

Montreal Lab - 800.361.1679