 |
|
| |
| Certifications and Accreditations |
|
| |
| Educational Partners |
 |
| MSi is a corporate sponsor to Triton Community College Engineering Technology Curriculum. Read More |
|
|
Back to Salt Spray Learning Center  Back to Learning Center Home Page |
Salt Spray Corrosion Testing |
|
| SAMPLE IDENTIFICATION |
| Quantity |
Sample I.D. |
| 8 |
See Below |
|
| |
| TEST RESULTS |
| |
| Salt Spray Testing |
| Sample I.D. |
Hours |
Corrosion Observations |
| KS Tool |
16 mm Combination |
A |
96 |
Rust at Ends and Lettering |
| 196 |
Rust at Ends and Lettering |
| B |
96 |
Rust at Closed End and Lettering |
| 196 |
Rust at Closed End, Lettering and Edges |
| 15mm/17mm Flare Nut |
C |
96 |
Rust at Ends |
| 196 |
Rust at Ends and Lettering |
| D |
96 |
Rust at Ends and Lettering |
| 196 |
Rust at Ends, Lettering and Edges |
| China |
5/8” Combination |
E |
96 |
Rust at Closed End |
| 196 |
Rust at Closed End with Few Spots at Lettering |
| F |
96 |
Rust at Closed End |
| 196 |
Rust at Closed End and Edges |
| 15mm/17mm Flare Nut |
G |
96 |
Rust at End, Flats and Lettering |
| 196 |
Rust at End, Flats, Edges and Lettering |
| H |
96 |
Rust at End, Flats and Lettering |
| 196 |
Rust at End, Flats, Edges and Lettering |
|
* Testing performed in accordance with ASTM B117 per client request. |
| |
|
Respectfully Submitted, |
|
|
|
MSi Testing & Engineering, Inc. |
|
|
|
Robert J. Bulthuis |
RJB/s/ E-document |
Manager – Metallographic Laboratories |
|
| |
 |
| KS Tool - 16mm Combination Wrenches After 196 Hours of Exposure |
| |
 |
| KS Tool - 15mm/17mm Flare Nut Wrenches After 196 Hour of Exposure |
| |
 |
| China - 5/8" Combination Wrenches After 196 Hours of Exposure |
| |
 |
| Snap-On 15mm/17mm Flare Nut Wrenches After 196 Hours of Exposure |
| |
|
|
|
|
|
 |
|
American Owned And Operated. |
|
|
